Skip to main content

Troubleshooting the CompanyCam + Housecall Pro Integration

Learn how to troubleshoot the CompanyCam + Housecall Pro integration, including Projects that aren’t created, content that isn’t syncing, and uploads that land in the wrong Estimate or Job.

Housecall Pro is field service management software that helps home service companies schedule jobs, manage customers, and get paid. When it’s connected to CompanyCam, photos, videos, and Files from your Projects sync to the active Estimate or Job in Housecall Pro.

This article helps you find and fix syncing problems on your own, based on the sync method you chose. If you haven’t connected yet, see Connecting CompanyCam to Housecall Pro. For how syncing works day to day, see Using the CompanyCam + Housecall Pro Integration.

This integration is only available on the web app.


Find your sync method

Your sync method is the Sync CompanyCam content to Housecall Pro Estimates, Jobs, or both setting. It decides which record type can create a Project and receive synced content for an Address.

To see which one you chose, click App Marketplace in the left-hand navigation under Integrations > search for Housecall Pro > click the Housecall Pro Card > click Edit.

Note: Admins and Managers can edit sync settings or disconnect the integration.

  • Estimates: Only Estimates create Projects and receive content.

  • Jobs: Only Jobs create Projects and receive content.

  • Estimates and Jobs: Either can create a Project and receive content, depending on which is created first under that Address.


Start with these checks

Before jumping to a specific problem below, work through these checks in order. They catch the most common causes of a Project not being created or content not syncing. Stop when the problem is fixed.

  1. Confirm the Housecall Pro card in App Marketplace says Connected.

  2. Confirm you created an Estimate or Job for the Customer’s Address that matches your sync method. A Customer and Address alone don’t create a Project.

  3. Find the Project in CompanyCam and confirm its label says Housecall Pro Estimate or Housecall Pro Job.

  4. Wait up to 5 minutes, then refresh Housecall Pro. Syncing can take up to 5 minutes.

If these checks don’t solve it, find your problem below.


Fix a specific problem

A Project wasn’t created

CompanyCam creates a Project the first time you add an Estimate or Job for a Customer’s Address.

Note: Admins and Managers can edit sync settings.

  1. Confirm you created an Estimate or Job, not only a Customer and Address.

  2. Confirm the record type matches your sync method. Use an Estimate if you chose Estimates, a Job if you chose Jobs, or either if you chose both.

  3. If it doesn’t match, click App Marketplace in the left-hand navigation under Integrations > search for Housecall Pro > click the Housecall Pro Card > click Edit.

  4. Update the Sync CompanyCam content to Housecall Pro Estimates, Jobs, or both settings.

If the Customer existed before you connected the integration, you'll see an older customer without a linked Project below.

Photos, videos, or Files aren’t showing in Housecall Pro

Content syncs to the Attachments section of the active Estimate or Job.

  1. Confirm the Project label says Housecall Pro Estimate or Housecall Pro Job. If the Project doesn’t exist, see A Project wasn’t created above.

  2. Open the most recently created Estimate or Job for that Address in Housecall Pro. Confirm it’s a record type your sync method includes.

  3. Scroll down to Attachments and look for your content.

  4. Confirm the content is a photo, video, or File. Documents and Checklists don’t sync.

  5. Confirm the file size. Photos and Files must be under 500 MB. Videos must be under 100 MB.

  6. Wait up to 5 minutes, then refresh the page.

If you closed the newest entry and reopened an older one, see Content syncs to the wrong Estimate or Job below.

Content syncs to the wrong Estimate or Job

By default, CompanyCam syncs uploads to the most recently created Estimate or Job. You can change the active sync target in Housecall Pro using the On My Way status.

Important: If you close the most recently created Job and reopen an older one, syncing doesn’t move to the reopened entry automatically. Click On My Way on the entry you want active.

  1. Open the Estimate or Job you want to activate in Housecall Pro.

  2. Click On My Way. CompanyCam sets that Estimate or Job as the active sync target.

  3. Wait 5 minutes before uploading photos to give the change time to sync.

An older customer doesn’t have a linked Project

A Customer you created in Housecall Pro before you connected the integration doesn’t have a linked Project yet.

  1. Open the Estimate or Job for that Customer’s Address in Housecall Pro.

  2. Click On My Way. CompanyCam creates a new Project linked to that Estimate or Job and turns on syncing.

  3. Wait 5 minutes before uploading photos.

Note: On My Way always creates a new linked Project. It won’t connect to a Project you created manually, even if one exists for that Address.

If On My Way didn’t work for your older Jobs

If you have a lot of Jobs that were created before you connected, you can ask our support team to run a historical sync. Contact our support team and let us know you’d like a historical sync for your Housecall Pro Jobs.

A historical sync brings in your 1,000 most recent active Jobs. Active Jobs are Jobs with a status of unscheduled, scheduled, or in progress. Canceled, completed, and deleted Jobs don’t sync.

A historical sync doesn’t bring in Estimates. For an older Estimate, click On My Way on it, as in the steps above.

A Project is labeled Housecall Pro Customer

A Project labeled Housecall Pro Customer was created under our previous integration workflow, before an Estimate or Job existed for that Address. These Projects aren’t linked to an Estimate or Job, so they can’t sync.

  1. Create a new Estimate or Job for that Customer’s Address in Housecall Pro. This updates the Project label in CompanyCam from Housecall Pro Customer to Housecall Pro Estimate or Housecall Pro Job and turns on syncing.

  2. Re-upload your photos, videos, and Files to the Project. They’ll sync to the Attachments section of the active Estimate or Job within a few minutes.

A Customer with multiple addresses has only 1 Project

CompanyCam tracks each Address as a separate Project. It creates the Project the first time you add an Estimate or Job for that Address.

  1. Open the Customer in Housecall Pro and confirm each Address is added.

  2. Confirm each Address has its own Estimate or Job that matches your sync method.

  3. If an Address existed before you connected the integration, open its Estimate or Job and click On My Way.

Primary contact info isn’t showing in CompanyCam

Note: Admins and Managers can edit sync settings.

  1. Click App Marketplace in the left-hand navigation under Integrations > search for Housecall Pro > click the Housecall Pro Card > click Edit.

  2. Confirm Sync Primary Contacts from Housecall Pro into CompanyCam is on.

  3. Confirm the Project exists. Contact info syncs once the Project exists.

  4. Open the Project in CompanyCam and check the Customers section for the Customer’s primary contact phone number and email.

Users aren’t assigned, or the wrong Users are assigned

Note: Admins and Managers can edit sync settings.

  1. Click App Marketplace in the left-hand navigation under Integrations > search for Housecall Pro > click the Housecall Pro Card > click Edit.

  2. Confirm Automatically assign Housecall Pro Users to the matching CompanyCam Project is on.

  3. Confirm the User is assigned to the Estimate or Job in Housecall Pro.

  4. Confirm the User’s email in Housecall Pro matches their email in CompanyCam.

  5. Confirm the Project is linked to a Housecall Pro record. Manually created Projects that aren’t linked aren’t affected.

Important: Automatic User assignment overwrites existing Project assignments. Users assigned in Housecall Pro replace any Users previously assigned to linked CompanyCam Projects.


FAQs

Does creating a Customer create a Project?

Creating a Customer or Address in Housecall Pro doesn’t create a CompanyCam Project. CompanyCam creates the Project once you add the first Estimate or Job for that Address.

Can I change my sync method?

You can change your sync method any time. Click App Marketplace in the left-hand navigation under Integrations > search for Housecall Pro > click the card > click Edit. Only Admins and Managers can edit sync settings.

What happens if I disconnect and reconnect?

Disconnecting stops new syncing but doesn’t delete Projects, photos, videos or Files that already synced. When you reconnect, Projects linked to a Housecall Pro Customer before you disconnected reconnect and continue syncing. A Project you created manually while disconnected won’t link to Housecall Pro. Click On My Way on the relevant Estimate or Job to set up that link.

Do Documents and Checklists sync to Housecall Pro?

Documents and Checklists from CompanyCam don’t sync to Housecall Pro. Only photos, videos, and Files sync.

Can an older Estimate or Job link to a manual Project?

Estimates and Jobs that existed before you connected can’t link to a Project you created manually. Clicking On My Way creates a new linked Project instead.

Can Support run a historical sync for older Jobs?

Support can run a historical sync for older Housecall Pro Jobs. It syncs your 1,000 most recent active Jobs. Contact our support team to request one.

Which Jobs does a historical sync bring in?

A historical sync brings in your 1,000 most recent active Jobs: unscheduled, scheduled, and in progress. Canceled, completed, and deleted Jobs don’t sync.

Does a historical sync include Estimates?

A historical sync doesn’t include Estimates. Click On My Way on an older Estimate to create a linked Project for it.

What should I include when I contact Support?

Include the details below so we can help faster:

  • Your sync method.

  • The Customer’s Address.

  • Whether you created an Estimate or Job.

  • The label on the Project in CompanyCam.

  • What you expected to happen and what happened instead.


💡 Need more help?
​Contact our Support team — we’re here Monday through Friday.

The CompanyCam Community has real job-site examples, templates, and tips from crews using this every day. Jump in with a question or just browse.

Did this answer your question?