CompanyCam, JobNimbus, and Hover work together so a Hover report ordered from inside JobNimbus lands in the right CompanyCam Project without any manual uploading. Once you're connected, your crew captures the photos Hover needs, Hover generates the report, and everything ends up on the same JobNimbus record automatically.
This integration is only available on the web app.
Setting up the integration
Note: You must have Admin permissions in both CompanyCam, JobNimbus, and Hover to set up this integration.
Connect all three pieces before you can order a Hover report from JobNimbus:
Connect JobNimbus to CompanyCam. Follow Connecting JobNimbus to CompanyCam to link the accounts.
Connect Hover to CompanyCam. Follow Connecting CompanyCam and Hover to link the accounts.
Turn on Hover ordering inside JobNimbus. Follow JobNimbus's documentation to enable their Hover integration.
Confirm both cards show Connected in CompanyCam's App Marketplace before placing your first order.
How the integration works
Once all three pieces are connected: create a Contact or Job in JobNimbus, and CompanyCam automatically creates a matching Project. Order the Hover report from inside that JobNimbus record, and once the report finishes, both the report and the crew's photos land in that same CompanyCam Project.
From there, everything syncs back to the matching JobNimbus record — so the office and the field both find it in one place. For a closer look at how each integration behaves on its own, see Using the CompanyCam + JobNimbus Integration and Using the CompanyCam + Hover Integration.
Important: Requesting a Hover capture directly from a CompanyCam Project won't involve JobNimbus. To keep JobNimbus in the loop, order from JobNimbus using Send to Hover instead.
Ordering a Hover report from JobNimbus
In JobNimbus, create a new Contact or Job. This creates a matching CompanyCam Project, labeled JobNimbus Contact or JobNimbus Job.
Open the Contact or Job in JobNimbus, click the three dots in the top-right corner, then click Send to Hover.
Choose the assignee and the Hover deliverable, then click Send Order.
Open the Hover app and find the order waiting for photos.
Capture the photo set Hover requires.
Submit the Hover order.
Once the order finishes processing, Hover sends the photos to the CompanyCam Project's Photos section, and the finished measurement report to the Project's Documents section as a PDF. From there, they sync back to the matching JobNimbus record's Photos and Documents sections.
Important: Don't create the CompanyCam Project by hand. A Project you create manually isn't connected to JobNimbus or Hover, so nothing will sync to it. Let JobNimbus create the Project for you.
FAQs
What creates a Project in CompanyCam?
What creates a Project in CompanyCam?
Creating a new Contact or Job in JobNimbus creates a matching CompanyCam Project. Only newly created Contacts and Jobs trigger this — see below if you're wondering about existing records.
Can I set up this integration on mobile?
Can I set up this integration on mobile?
This integration can only be set up on the web app. Once it's connected, your crew can still take and upload photos from the CompanyCam mobile app, and those photos sync as usual.
What happens if I create the CompanyCam Project manually?
What happens if I create the CompanyCam Project manually?
A manually created CompanyCam Project isn't connected to JobNimbus or Hover, so its photos and reports won't sync. Always let JobNimbus create the Project by adding a new Contact or Job.
Where does the Hover report show up in CompanyCam?
Where does the Hover report show up in CompanyCam?
The Hover photos land in the Project's Photos section. The measurement report lands in the Project's Documents section as a PDF.
Do CompanyCam photos sync to JobNimbus?
Do CompanyCam photos sync to JobNimbus?
Photos your crew takes in the CompanyCam Project sync back to JobNimbus automatically, as long as the Project was created through the integration. Assigned Users and Sales Reps sync back to JobNimbus too.
Why aren't my photos or assignments syncing?
Why aren't my photos or assignments syncing?
Photos and assignments only sync between CompanyCam and JobNimbus when the User exists on both platforms with the same email address. If the emails don't match, the sync won't go through.
Does content added in CompanyCam sync back to Hover?
Does content added in CompanyCam sync back to Hover?
No. Syncing between CompanyCam and Hover only flows from Hover to CompanyCam. Content you add directly in a CompanyCam Project won't appear in Hover.
Can I use "Request Hover Measurements" instead of ordering from JobNimbus?
Can I use "Request Hover Measurements" instead of ordering from JobNimbus?
You can, but that request won't involve JobNimbus. Requesting a Hover capture directly from a CompanyCam Project uses Hover's own workflow, independent of any JobNimbus record. If you want the order tied to a JobNimbus Contact or Job, place it from JobNimbus using Send to Hover instead.
Do existing JobNimbus records create a Project?
Do existing JobNimbus records create a Project?
Existing JobNimbus Contacts and Jobs don't create a CompanyCam Project. Only Contacts and Jobs created after you connect the integration trigger a new Project.
How do I disconnect this integration?
How do I disconnect this integration?
Disconnecting this workflow means disconnecting JobNimbus and Hover separately in CompanyCam's Integrations settings. Both work the same way: open Integrations, find the card, and click Disconnect or Edit. Disconnecting stops new syncing but doesn't delete Projects, photos, or files that have already synced.
💡 Need more help?
Contact our Support team — we're here Monday through Friday.
The CompanyCam Community has real job-site examples, templates, and tips from crews using this every day. Jump in with a question or just browse.